KNOWING YOUR SEWING MACHINE

—

THREADING THE MACHINE

Winding the bobbin

CAUTION

●We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB: XA5539-151). Using other bobbins may cause damage to the machine.

Actual size

11.5mm (7/16 inch)

This model

Other models

1

2

1 Pull the thread in completely.

3

1 Pre-tension disk

2 Bobbin winder shaft

3 Bobbin

1Pull up the spool pin and put a spool of thread on this pin.

2While holding the thread from the spool with your right hand, pass the thread toward you, in the groove on the thread guide. Then, pass the thread around the pre-tension disk and pull the thread in completely.

1

1Pre-tension disk

CAUTION

●If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin.

11