Sewing buttons
|
| Stitch | Stitch |
|
| |
Stitch | Pattern | Length | Width | Foot | Other | |
Name |
| [mm | [mm |
|
| |
|
| (inch)] | (inch)] |
|
| |
| 8 |
|
| Button |
| |
Zigzag | 0.7 | 1.5 | Sewing | Darning | ||
| ||||||
Stitch |
| (1/32) | (1/16) | Foot | Plate | |
|
|
|
| “M” |
| |
| 9 |
|
| Button |
| |
Zigzag | 1.5 | 3 | Sewing | Darning | ||
| ||||||
Stitch |
| (1/16) | (1/8) | Foot | Plate | |
|
|
|
| “M” |
| |
| 10 |
|
| Button |
| |
Zigzag | 2 | 5 | Sewing | Darning | ||
| ||||||
Stitch |
| (1/16) | (3/16) | Foot | Plate | |
|
|
|
| “M” |
| |
|
|
|
|
|
|
1Measure the distance between the buttonholes and set the pattern selection dial to the Zigzag Stitch with the desired width.
2Turn off the machine.
3Change“M”. the foot to the button sewing foot
4Placeplate. the darning plate on the needle
5Turn on the machine.
CAUTION
●Do not turn on the machine while pressing down the foot controller. The machine may start unexpectedly and cause personal injury or damage to the machine.
6Put a button between the foot and the fabric and make sure that the needle enters the holes without hitting the button. If it hits, see step 1.
7At a slow speed, sew about 10 stitches.
CAUTION4
●Make sure the needle does not hit the button during sewing. The needle may break and you may be injured.
8Pull the upper thread at the end of the stitching to the wrong side of the fabric,
and then tie it with the bobbin thread.
X Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching.
32