KNOWING YOUR SEWING MACHINE—
THE MAIN PARTS
4 3 | 2 | 1 |
|
|
|
5 |
|
|
| C |
|
|
|
|
|
| |
6 |
|
|
|
|
|
7 |
| B |
| D |
|
|
|
|
| ||
8 |
|
| H | E |
|
|
|
|
| ||
|
|
|
|
| |
| A |
|
| F | G |
| 0 |
|
|
|
1Bobbin winder (Page 11)
This winds the thread onto the bobbin for use as the lower thread.
2Spool pin (Page 11, 15)
This holds the spool of thread.
3Upper
This controls the tension of the upper thread.
4Thread guide (Page 11, 15)
This is used when winding the thread onto the bobbin and then threading the machine.
5Thread
6Thread cutter (Page 22)
Pass the threads through the thread cutter to cut them.
7Needle threader (Page 17)
(This is only available on certain models.)
8
(This is only available on certain models.)
9Flat bed attachment with accessory compartment (Page 5)
0Presser foot (Page 8)
AReverse sewing lever (Page 10)
Push this lever to stitch in the reverse direction.
BPattern selection dial (Page 9)
Rotate the dial in either direction to choose the stitch you want.
CHandwheel
Used to manually raise and lower the needle.
DButtonhole
EMain power and sewing light switch (Page 7) You can turn the main power and sewing light switch on and off.
FFoot controller jack / socket (Page 6)
Plug in the foot controller plug and connect the machine to the power supply.
GPresser foot lever (Page 15)
Used to raise and lower the presser foot.
HFoot controller (Page 7)
You can use this to control the sewing speed, and to start and stop sewing.
Foot Controller:
Model
Model
The foot controller part code differs depending on the country or region. Contact your dealer or the nearest authorized service center.
Flat bed attachment
The accessories can be stored in a compartment inside the flat bed attachment.
1Slideopen theit. flat bed attachment to the left to
1
2
1Flat bed attachment
2 Storage compartment
5