OPTIONAL ACCESSORIES
Using the blind stitch foot
|
|
| Stitch | Stitch Width | |
Stitch Name | Pattern | Length | |||
[mm (inch)] | |||||
|
|
| [mm (inch)] | ||
Straight Stitch | 5 |
|
| ||
(Center Needle |
|
| 2.5 (3/32) | — | |
|
| ||||
Position) |
|
|
|
| |
|
|
|
| ||
|
|
|
|
| |
Zigzag Stitch | 8 | 0.7 (1/32) | 1.5 (1/16) | ||
|
| ||||
|
|
|
|
| |
Zigzag Stitch | 9 | 1.5 (1/16) | 3 (1/8) | ||
|
| ||||
|
|
|
|
| |
| 10 |
|
| ||
Zigzag Stitch |
|
| 2 (1/16) | 5 (3/16) | |
|
|
|
|
| |
Stretch Blind | 14 | 1 (1/16) | 5 (3/16) | ||
|
| ||||
Hem Stitch |
|
| |||
|
|
|
| ||
|
|
|
|
| |
This foot comes in handy not only for stretch blind hem stitching, but also for sewing fabric edges and seams.
■When edge stitching
1Turn off the machine.
2Attach the blind stitch foot. Turn on the machine.
3Position the needle the distance you want the stitch to be from the edge of the fabric, and then lower the needle in that position.
4Turn the foot guide screw and carefully adjust to guide the fabric.
■When sewing seams
1Turn off the machine.
2Attach the blind stitch foot. Turn on the machine.
CAUTION
●Do not turn on the machine while pressing down the foot controller.
3Set the pattern selection dial to the Straight Stitch (Center Needle Position). Align the foot guide with the needle position.
4Set the pattern selection dial to the Zigzag Stitch with the desired width.
5Place the fabric under the foot so the foot guide is aligned between both edges of the fabric.
6Lower the presser foot and start sewing.
5
■When stretch blind hem stitching
When stretch blind hem stitching using the blind stitch foot, turn the screw to adjust the guide to the folded hem.
•For more details on blind hem stitching, see page 27.
1
2
2
1Screw
2 Guide
1
1
2
3
1Screw
2 Guide
3 Folded hem
36