6. USING THE OPERATION PANEL
BAS-341F,342F
15
6. USING THE OPERATION PANEL

6-1. Explanation of panel

(1) POWER indicator........................W hen the power is turned on, the indicator lights to show that the power is on.
(2) PROGRAM No. display ..............Displays the program number 00 - 99.
(3) Program select switch.................Used to s elect the program number when reading a program from or writing a
program to disk.
(4) Program Read/Write switch .......Used to read a program from floppy disk, or to write a newly programmed stitch
pattern to floppy disk.
Up to ten patterns (00 - 99) can be stored on each disk.
(5) Display screen.............................Used to display data suc h as menus, errors and memory switch settings.
(6) Menu switch.................................Used to selec t the desired menu (scale, speed, bobbin thread counter, split No.).
One of the indicators (7) - (11) illuminates to indicate the menu select ed, and the
setting for that menu them appears on the display screen (5).
The illuminated indicator changes in the following order each time the switch is
pressed.
X-SCALE indicator (7) Y-SCALE indicator (8) SPEED indicator (9)
B.T. COUNTER indicator (10) SPLIT NO. indicator (11)
(7) X-SCALE indicator .....................Illuminates when X-scale mode has been selected using the m enu switch (6).
(8) Y-SCALE indicator ......................Illuminates when Y-scale mode has been selected using the m enu switch (6).
(9) SPEED indicator .........................Illuminates when speed mode has been se lected using the menu switch (6).
1207S
(4)
(6)
(3)
(2)
(1)
(
7
)
(5)
(
8
)
(
9
)
(
10
)
(
11
)