6. USING THE OPERATION PANEL
BAS-341F, 342F 16
(10) Bobbin Thread COUNTER............Illuminates when bobbin thread counter mode has been selected using the menu
indicator switch (6).
(11) SPLIT NO. indicator........................Illuminates when split No. mode has be en selected using the menu switch (6).
(12) Dial ................................................. The setting shown on the display screen (5) can be changed by turning th is dial
while pressing the STEP BACK switch (17).
(13) Bobbin Thread SET switch................. Used to store the number of work pieces displa yed in th e bo bbin threa d c ounter
to floppy disk.
(14) Bobbin Thread CHANGE ..............Used to c ontinue sewing after replacing the bobbin thread.
switch (An alarm will sound when the counter reads <000>. Sewing is not possible when
the counter reads <000>.) (Refer to "6-8. Using the bobbin thread counter".)
(15) TEST switch ...................................Used to move the feed mechanism only in order to conf irm a programmed stitch
pattern.
(16) TEST indicator................................ Lights when the TEST switch is pressed.
(17) STEP BACK switch........................ Used when winding a fr esh bobbin, or when correcting a stitch pattern due to a
(RESET switch) broken needle thread.
Also used to reset error displays.
(5)
(14)
(13)
(10)
(5)
(15) (17)
(16)(6) (12) 1208S
(11)