6. USING THE OPERATION PANEL
BAS-341F,342F
17
6-2. Using the floppy disk<Compatible types of floppy disk>
Data type No. of stitches
programmed Data resolution Disk Format Write
enabled
300E type
(300F type)
20,000 stitches per
pattern 100 pattern
Up to a maxi-mum
of 360,000 stitches
0.05 mm/pulse Yes
Tajima embroidery
data 50,000 st it che s p er pat te rn 0.1 m m/pulse
2HD 1.44 MB
No
Old 300A type
4,000 stitches per
pattern 10 patterns
Up to a maximum of
40,000 stitches
0.1 mm/pulse Yes
Old 300 data
2,000 stitches per
pattern 10 patterns
Up to a maximum of
20,000 stitches
0.2 mm/pulse
2DD Automatically
formatted
No
• The above four types of data can all be read, but when writing t o disk, all data is automatic ally converted to 300F,
300E data when writing to 2HD disks and 300A data when writing to 2DD disks.
• When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk . (The programmer can be used
to format these disks. Refer to the programmer instruction manual f or details.)
• TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-300F and B AS-
300E data.
• Restriction on using 2DD floppy disks.
In order to maintain compatibility with the old 300A series, the following r estrictions have been placed on the use of
the new functions which have been added to the E series.
Restricted function A series (2DD) F, E series (2HD) Applicable
command
Resolution 0.1 mm/pulse 0.05 mm/pulse
Low-speed conversion 2 types
(400 and 1,200 revolutions) 4 types (400, 600, 800and
1,200 revolutions) [668] L
[669] L
Split function
during embroidering Not available Available [220] L
[230] L
Needle down sto p for spl it Not available Available [221] L
[231] L
Expansion option output Not availab le Available