11-2 BE-1204B-BC • BE-1206B-BC
Chapter 11 Error code list
Code Error Measures
E-00 No error occurs.
E-01 Either motor of main shaft, X- or Y-axis, or
lower shaft has locked.
E-02 Overtravel occurs during home position
detecting movement.
This is not usually displayed.
E-03 The stop switch is pressed during home
position detecting movement. Press the or turn on the F/B switch on the head to either
side to restart the home position detecting movement again.
E-04 Home position detection out of range This is not usually displayed.
E-05 Needle stop position error
Adjust the pulley stop position (100 degrees) above the needle
and press the or turn on the F/B switch on the head to
either side.
E-06 Needle bar case position error
Adjust the position of needle bar case manually, then press the
or turn ON the F/B switch on the head to either side. If the
same error occurs again, the color change proper position
sensor is faulty.
E-07 Needle bar case lock Press the or turn on the F/B switch on the head to either
side. If the same error occurs again, the color change
mechanism is faulty.
E-08 Stop switch or emergency switch was pressed
while the needle bar case is traveling. This is not usually displayed.
E-09 X-axis home position detection error Turn the power off and on once. If the same error occurs
again, the X-axis mechanism is faulty.
E-0A Thread breaking error After passing through the thread, press the or turn on the
F/B switch on the head to either side.
E-0B Stop or emergency stop during sewing This is not usually displayed.
E-0C Lower thread broke during embroidering. After the replacement of the lower thread, press the or
turn ON the F/B switch on the head to either side.
E-0D The machine does not return to the home
position.
E-0E Mending finish
This is not usually displayed.
E-0F Failed in the reading of needle bar No.
Press the or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty, or the color change position sensor is
faulty.
E-10 Abort by the beam sensor ON Press the or turn ON the F/B switch on the head to either
side.
E-11 Failed in the reading of X home position sensor Press the or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.
E-12 Failed in the reading of X home position sensor Press the or turn ON the F/B switch on the head to either
side. If the same error occurs again, the I/O CPU
communication is faulty.