Brother DCP-7020 1, 2, 5, 3, 1, 2, 3, 4

Chapter 2
2 - 2
Setting the Beeper Volume
You can change the beeper volume. The
default setting is Med. When the beeper is on,
the DCP will beep when you press a key or
make a mistake.
1Press Menu and or to select
1.General Setup.
Press Set.
2Press or to select 3.Beeper.
Press Set.
3Press or to select Low, Med,
High or Off.
Press Set.
4Press Stop/Exit.
Toner Save
You can conserve toner using this feature.
When you set Toner Save to On, print
appears lighter. The default setting is Off.
1Press Menu and or to select
1.General Setup.
Press Set.
2Press or to select 4.Ecology.
Press Set.
3Press or to select
1.Toner Save.
Press Set.
4Press or to select On (or Off).
Press Set.
5Press Stop/Exit.
General Setup
3.Beeper
General Setup
4.Ecology