Troubleshooting and routine maintenance
6 - 15
6
Packing and shipping the DCP
When you transport the DCP, use the
packing materials that came with your DCP. If
you do not pack the DCP properly, you could
void your warranty. The DCP should be
adequately insured with the carrier.
1Turn off the DCP’s power switch.
2Unplug the DCP from the AC power
outlet.
3Unplug the cable from the DCP.
4Open the front cover.
5Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
6Place the drum unit and toner cartridge
assembly into the plastic bag and seal
the bag.
7Close the front cover.
8Wrap the DCP in the plastic bag and
place it in the original carton with the
original packing material.
9Pack the drum unit and toner cartridge
assembly, AC cord and printed
materials in the original carton as shown
below:
Note
If you are returning your DCP to Brother as
part of the Exchange Service, pack only the
DCP. Keep all separate parts and printed
materials to use with your “Exchange” DCP.
0Close the carton and tape it shut.