Chapter 6

6 - 12

White Spots on black text and
graphics at 3.1 in.
(78.5 mm) intervals
Black Spots at 3.1 in.
(78.5 mm) intervals
Cleaning the drum unit
Dust, paper powder, glue, and so on may stick to t he surface of t he photosensi tive
drum (OPC) and cause black or white spot s to appear on prin ted documents.
Make 10 to 15 copies of a blank, white sheet of paper. (See Making multiple copies
on page 3-1.)
If you still see the spots on printed documents after making multiple copies, clean
the drum unit as follows :
1 Remove the drum unit and t oner cartridge as sembly, and the n remove the tone r
cartridge from the drum unit.
2 Position the print sample in front of the drum unit so you will know the exact
position on the drum that is causing the poor print.
3 Turn the black gear on th e drum as you chec k the surface of the OPC drum.
The OPC drum is photosensitive so do not touch it with your fingers.
4 When you find the substance on the drum surface that matches the print
sample, gently dab the surface of the OPC drum with a cotton swab that is lightly
dampened with isopropy l alcohol.
Do not use a scrubbing or wiping motion because thi s might damage the
drum.
Do not try to clean the sur face of the OPC drum with a sharp object , such as
a ball-point pen, because this might cause permanent damage to the drum
unit.
If the print quality still has not improved you need to install a new drum.
(See Replacing the drum unit (DR-350) on page 6-22.)
Examples of poor print quality Recommendation
3.1 in.
(78.5 mm)
3.1 in.
(78.5 mm)
3.1 in.
(78.5 mm)
3.1 in.
(78.5 mm)
OPC drum surface