3 - 1
3

Using the DCP as a

copier

You can use your DCP as a copier, making
up to 99 copies at a time.
The printable area of your DCP begins at
approximately 0.12 in. (3 mm) from both
sides and 0.12 in. (3 mm) from the top or
bottom of the paper.
Note
The printable area shown above is for a
single copy or a 1 in 1 copy using Letter or
Legal size paper. The printable area changes
with the paper size.
Making a single copy
1Load your document.
2Press Start.
Note
To stop copying, press Stop/Ex it.
Making multiple copies
1Load your document.
2Press Number of Copies repeatedly
until the number of copies you want
appears (up to 99).
—OR—
Press Number of Copies, and then
press or hold or to increase or
decrease the number of copies.
Note
To sort the copies, press Options and or
to select Stack/Sort. (See Sorting
copies using the ADF on page 3-5.)
3Press Start.
Stop copying
To stop copying, press Stop/Ex it.
Making copies
0.12” (3 mm)
0.12” (3 mm) Unprintable area