Brother DCP-7020 1, 2, 3, 4, 5, 1, 2, 3, 1, 2

Getting started

2 - 3

2

Sleep Time

Setting the Sleep Time reduces power

consumption by turning off the fuser inside

the DCP while it is idle. You can choose how

long the DCP is idle (from 00 to 99 min utes)

before it goes into sleep mode. The timer is

automatically reset when the DCP receives

PC data or makes a copy. The factory setting

is 05 minutes. While the DCP is in sleep

mode you will see Sleep on the LCD. If you

try to print or copy in sleep mode, there will be

a short delay while the fuser warms up to its

working temperature.

1Press Menu and or to select

1.General Setup.

Press Set.

2Press or to select 4.Ecology.

Press Set.

3Press or to select

2.Sleep Time.

Press Set.

4Use the or to enter the length of

time the DCP is idle before it goes into

sleep mode (00 to 99).

Press Set.

5Press Stop/Exit.

Note

If you want to turn off sleep mode, press Start

and Options simultaneously in Step 3.

Setting the LCD Contra st

You can change the contrast to help the LCD

look lighter or darker.

1Press Menu and or to selec t

1.General Setup.

Press Set.

2Press or to select

5.LCD Contrast.

Press Set.

3Press or to select Light or

Dark.

Press Set.

4Press Stop/Exit.

Printing the User Settings List

You can print a list of your settings.

1Press Menu and or to selec t

1.General Setup.

Press Set.

2Press or to select

6.User Settings.

Press Set.

3Press Start.

General Setup

4.Ecology

Ecology

2.Sleep Time

General Setup

5.LCD Contrast

General Setup

6.User Settings

Contents

Main If you need to call Customer Service Brother numbers Register your product http://solutions.brother.com Frequently asked questions (FA Qs) For Customer Service Ordering accessories and supplies http://www.brothermall.com Notice - Disclaimer of Warranties (USA and Canada) Compilation and Publication Notice Brother One Year Limited Warranty and Repl acement Service (USA only) Brother One Year Limited Warranty and Replacement Service (USA only) BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE LIMITED WARRANTY (Canada only) Safety precautions To use the DCP safely Page Table of Contents 1 4 2 3 5 6 A S I Using this Guide Introduction Choosing a location How to access the complete Users Guide To view Documentation (For Windows) 1 2 3 1 2 3 4 How to find Scanning instructions Control panel overview Load document Using the automatic document feeder (ADF) 1 2 3 1 2 3 About paper Recommended Paper Choosing acceptable paper Paper capacity of the paper trays How to load paper To load paper or other media in the paper tray 1 2 3 4 5 1 2 2 Initial Setup Setting the Paper Type Getting started Setting the Beeper Volume 1 2 5 3 Toner Save 1 2 3 4 2 1 2 3 4 5 1 2 3 Printing the User Settings List 1 2 Using the DCP as a copier Making a single copy 2 Making copies Using the Temporary Copy keys Enlarging or reducing the image copied 2 3 Adjusting contrast 2 3 Changing the temporary copy settings Use the Options key to quickly set the following copy settings temporarily for the next copy. Quality 2 3 5 Sorting copies using the ADF 2 3 4 Making N in 1 copies (Page Layout) 2 3 4 6 7 8 Making a poster (Page Layout) 2 Changing the default copy settings Quality 1 2 3 Out of Memory message Software Features 5 Federal Communications Commission (FCC) Declaration of Conformity (USA only) Important Important - about the interface cable Important information Industry Canada Compliance Statement (Canada only) Disconnect device International ENERGY STAR Compliance Statement Laser safety FDA regulations 1 2 3 4 5 6 7 8 F G H Trademarks 6 - 1 Troubleshooting and routine maintenance 6 - 2 Page Paper jams Paper is jammed inside the DCP 1 2 3 4 5 Page Page Page 6 - 8 If you are having difficulty with your DCP 6 - 9 6 - 10 6 - 11 Improving the print quality This section provides information on the following topics: 6 - 12 Cleaning the drum unit 6 - 13 6 - 14 Packing and shipping the DCP Routine maintenance Cleaning the outside of the DCP 1 2 3 1 2 Page Cleaning the corona wire 1 2 5 3 4 1 2 3 4 5 6 7 9 8 Replacing the drum unit (DR-350) 1 2 3 4 5 Machine Information Checking the Serial Number 1 2 3 3 Checking the Drum Life 1 2 3 A On-screen programming Menu table Menu Mode Appendix Page A - 3 Appendix A - 4 S Product description General Specifications Print media Copy Scanner Mac OS X scanning is supported in Mac OS X 10.2.4 or greater. Printer Interfaces (Cables are not included.) S - 5 Computer requirements the Brother Utility.) Consumable items Toner life expectancy will vary depending upon the type of average print job. You can assign the Scan key to only one networked computer. Optional External Wireless Print/Scan Server (NC-2200w) Optional External Print Server (NC-2100p) I Index B C D Q R T U V