Chapter 5
38
Tray selection 5
You can change the tray use only for the next
copy.
aLoad your document.
bUse the numeric keys to enter the
number of copies (up to 99).
cPress TrayS elect.
dPress a or b to choose MP>T1, T1>MP,
#1(XXX)1 or MP(XXX) 1.
Press OK.
ePress BlackStart or Color Start.
1XXX is the paper size you set in Menu, 1, 2.
Note
• T2 or #2 appears only if the optional paper
tray is installed.
• To change the default setting for Tray
Select, see Tray use in copy
mode on page 22.
Out of memory
message 5
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Black Start or
Color Start to copy the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
If you run out of memory, you can add it. See
Memory board on page 62.
Press
TraySelect
MP>T1 or M>T1>T2
T1>MP or T1>T2>M
#1(XXX)1
#2(XXX)1
MP(XXX)1