Chapter 2
10
Recommended media 2
To get the best print quality, we suggest using
Brother paper. (See table below.)
We recommend using ‘3M Transparency
Film’ when you print on transparencies.
1Available in the USA a nd from November 20 06 in
Canada.
Handling and using me dia 2
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
The coated side of glossy paper is shiny.
Avoid touching the shiny (coated) side.
Load glossy paper with the shiny side
facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers and copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
Improper Setup
DO NOT use the following kinds of paper:
• D amaged, curled, wrinkled, or
irregularly shaped paper
1 0.08 in. (2 mm) or longer
Extremely shiny or highly textured paper
Paper already printed on by a printer
Paper that cannot be arranged uniformly
when stacked
Paper made with a short grain

Paper capacity of the output paper

tray 2
Up to 50 sheets of 20 lb Letter or 80 g/m2 A4
paper.
Transparencies or glossy paper must be
picked up from the output paper tray one
page at a time to avoid smudging.

Brother paper

Paper Type Item
Letter Plain BP60PL
(USA only)
Letter Glossy Photo BP61GLL1
Letter Inkjet (Matte) BP60ML
(USA only)
4" × 6" in. Glossy Photo BP61GLP 1
1
1