General setup
21

3

Note
You can also adjust the speaker volume
while you are listening to your OGM
(Outgoing Message) and ICMs (Incoming
Messages) by pressing d or c.
If you turn Incoming Recording Monitor to
OFF (Menu, 2, 7, 3) the Speaker for
screening calls will be disabled and you
won’t hear callers leaving messages. The
volume for other operations can still be
controlled using d or c.

Handset Volume

(MFC-3360C and FAX-1860C) 3
aPress Menu, 1, 4, 4.
bPress a or b to choose Low or High.
Press OK.
cPress Stop/Exit.
Note
You can adjust the handset volume any
time you are talking on the telephone.
There are two handset volume levels, Low
and High. The default setting is Low.
• P ress d or c to adjust the volume
level. The LCD shows the setting you are
choosing. The new setting will remain until
you change it again.

Choosing the Handset

Volume (For Volume Amplify)

(MFC-3360C and FAX-1860C) 3
Before you begin to use the machine, you
must decide if you need to set the handset
volume to Vol Amplify:On for a user who
is hearing-impaired. The AMPLIFY volume
level complies with FCC standards.
Vol Amplify:Off
This default setting is appropriate if none of
the users are hearing-impaired. During a
conversation, users can press d or c
on the control panel to adjust the volume to
Low or High. When the handset is replaced,
the handset volume will remain until you
change it again.
Vol Amplify:On - Temporary
This setting is appropriate if some of the
users are hearing-impaired. During a
conversation, users can press d or c
on the control panel to adjust the volume to
Low, High or Volume Amplify. When the
handset is replaced, the handset volume
returns to the de fault setting of Low.
Vol Amplify:On - Permanent
Choose Vol Amplify:OnPermanent if
all of the users are hearing-impaired. During
a conversation, users can press d or c
on the control panel to adjust the volume to
Low, High or Volume Amplify. When the
handset is replaced, the handset volume
returns to the de fault setting of
Volume Amplify.
Note
When you press d or c on the
control panel to adjust the volume, the
LCD shows the setting you are choosing.
Each key press changes the volume to the
next setting.
WARNING
It is important that you do NOT choose
Permanent unless ALL the users are
hearing-impaired. Otherwise, the default
setting of Volume Amplify may damage
the hearing of some users.