Dialing and storing numbers
53

8

Changing One-Touch and

Speed-Dial numbers 8
If you try to store a One-Touch or Speed-Dial
number where a number has already been
stored, the LCD will show the name or
number that has been stored there, and w ill
ask you to do one of the following:
Press 1 to change the stored number.
#05:MIKE
1.Change 2.Exit
Press 2 to exit without making a change.
If you chose 1, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
aEnter a new number. Press OK.
bEnter a new name. Press OK.
To change a character, use d or c to
position the cursor under the character
you want to change, then press
Clear/Back. Re-enter the character.

Setting up Groups for

broadcasting 8
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a
One-Touch key or a Speed-Dial number.
Each group uses up a One-Touch key or a
Speed-Dial location. You can then send the
fax message to all the numbers stored in a
Group just by pressing a One-Touch key or
entering a Speed-Dial number, and then
pressing Black Start.
Before you can add numbers to a Group, you need
to store them as One-Touch or Speed-Dial numbers.
You can have up to six small Groups, or you can
assign up to 99 numbers to one large Group.
aPress Menu, 2, 3, 3.
3.Setup Groups
bChoose an empty location where you
want to store the Group in one of the
following ways:
Press a One-Touch key.
Press Search/SpeedDial and enter
a two-digit location.
Press OK.
cUse the dial pad to enter a Group
number (1 to 6).
Press OK.
Setup Group:G01
dTo add One-Touch or Speed-Dial
numbers to the Group follow the
instructions below:
For One-Touch number 6 press
One-Touch key 6.
For Speed-Dial location 09, press
Search/Speed Dial, and then press
09 on the dial pad.
The LCD will display your chosen
One-Touch numbers with a l, and
Speed-Dial numbers with a # as shown
in the illustration.
G01:l06 #09