CHAPTER4 O PTIONS
4–9
5. Insert the network board connector firmly into the connector of the main
controller board, and then secure it with the two screws.
Fig.4-7
6. Secure the metal plate with the three screws inthe order shown.
Fig.4-8
7. Close the side cover.
8. Connect one end of the Ethernet Cable to the Network port of the printer.
9. Plug the power cord into theAC outlet, and then turn on the power switch.
10. For more details abouthow to optimize the Network board, please refer to
the Network Users Guide on the CD-ROM supplied with this printer.