1-30
☛ 4. Place the envelopes in the multi-purpose tray so they touch the back of the
tray and remain below the limit ▼ mark.
Fig. 1-19
✒ Note
Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛ 5. Press and slide the paper width adjuster to fit the envelope size.
Fig. 1-20
✒ Note
When you place paper on the multi-purpose tray, note the following:
•The print surface must be face up.
•The leading edge must be placed inside first so it rests lightly against
the printer.
•The top of the paper stack must be under the guides that are on both
sides of the tray.
Up to ▼ mark.