xv
Safety Inform ationIMPORTANT- For Your Safety
Toensure safe operation the three-pin plug supplied must be inserted only into a standard
three-pin power point which is properly grounded through the no rmal household wiring.
Extension cords used with this printer must be three-pin plug type a nd correctly wired to
provide proper grounding. Incorrectly wiredexte nsion cords may cause personal injury an
equipment damage.
The fact that the equipment operates satisfactorily does not imply that thepowe r is
grounded and that the installation is completely safe. For your safety,if in any doubt about
the effective grounding of the power,consult a qualif ied electrician.
Disconnect device
This printer must be installed near a power outlet that is easily accessible. In case of
emergencies, youmust disconnect the power cord from the power outlet to shut off the
power completely.
Gerรคuschemission / Acoustic NoiseEmission (For Germany Only)
Lpa< 70 dB (A) DIN 45635-19-01-KL2
Wiring Information(For U.K. Only)
Important
If the mains plug supplied with this printer is not suitable for your socket outlet, remove the
plug from the mains cord and fit an appropriate three pinplug. If the replacement plug is
intended to take a fuse then fit the same rating fuse as the original.
If a moulded plug is severed from the mains cord then it should bedestroyed because a
plug with cut wires is dangerous if engaged in a live socket outlet. Do not leave it where a
child might find it!
In the event of replacing the plug fuse, fit a fuse approved b yASTA to BS1362 with the
same rating as the original fuse.
Always replace the fuse cover.Never use a plug with the cover omitted.
WARNING -THIS PRIN TER MUST BE EARTHED
The wires in the mains cord are coloured in accordance with the following code :
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN: LIVE
The colours of the wires in the mains l ead of this printer may not correspond with the
colouredmarkings identifying the terminals in your plug.
If youneed to fit a differentplug, proceed as follows.