1-36
✒
✒✒
✒
Note Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛
☛☛
☛ 5. While pressing the paper guide release lever, slide the adjuster to fit the
paper size.
Fig. 1-26
Warni ng
Do not touch transparencies that have just been printed because the y are
very hot!
✒
✒✒
✒
Note When you place paper in the multi-purpose tray, note the following:
•When printing, the inside tray automatically rises to feed paper into the
printer.
•The print surface must be face up.
•The leading edge must be placed inside first so it rests lightly against
the printer.
•The top of the paper stack must be under the guides that are on both
sides of the tray.