Customizing this unit (MANUAL SETUP)

1 SOUND MENU

Use this feature to manually adjust speaker settings or compensate for video signal processing delays when using LCD monitors or projectors. Most of the SOUND MENU parameters are set automatically when you run AUTO SETUP (see page 28).

MANUAL SETUP

MANUAL SETUP

1 SOUND MENU 1/2

1 SOUND MENU 2/2

. A)SPEAKER SET

. F)DYNAMIC RANGE

B)SPEAKER LEVEL

G)AUDIO SET

C)SP DISTANCE

H)HDMI SET

D)EQUALIZER

I)EXTD SUR.

E)LFE LEVEL

[p]/[p]:Up/Down

[p]/[p]:Up/Down

[ENTER]:Enter

[ENTER]:Enter

Speaker settings

A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

SOUND MENU

.EXTRA SP ASSIGN ZONE2 >FRONT B PRESENCE NONE

FRONT B;;;;FRONT

PRIORITY;;;;;---

ZONE2 SET

Not Available

Extra speakers assignment EXTRA SP ASSIGN

Selects the function of the speakers connected to the EXTRA SP terminals.

Choices: FRONT B, ZONE2, PRESENCE, NONE

When you use the alternative front speaker system (see page 38)

Select “FRONT B”.

When you use the Zone 2 speakers (see page 91)

Select “ZONE2” to set the function of the speakers to the Zone 2 speakers.

When you use the presence speakers (see page 12)

Select “PRESENCE” to set the function of the speakers to the presence speakers.

When you do not use the EXTRA SP terminals

Select “NONE” to deactivate the EXTRA SP terminals.

Notes

This parameter shares the value with the “EXTRA SP ASSIGN” parameter in “AUTO SETUP”.

If you select “ON” in “BI-AMP” (see page 96), you cannot select “PRESENCE” or “ZONE2” in “EXTRA SP ASSIGN”.

After changing the “EXTRA SP ASSIGN” setting, carry out “AUTO SETUP” again (see page 28).

FRONT B speakers setting FRONT B

The “FRONT B” parameter is available only when you set “EXTRA SP ASSIGN” to “FRONT B”.

Use this feature to select the location of the FRONT B speakers.

Choices: FRONT, ZONE B

Select “FRONT” to turn FRONT A and B on or off when the FRONT B speakers are set in the main room.

Select “ZONE B” if the FRONT B speakers are set in another room. If FRONT A is turned off and FRONT B is turned on, all the speakers including the subwoofer in the main room are muted and this unit outputs sound at the FRONT B terminals only.

Notes

If you connect headphones to the PHONES jack of this unit, the sound is output from both the headphones and the speakers connected to the EXTRA SP terminals when “FRONT B” is set to “ZONE B”.

If a DSP program is selected when “FRONT B” is set to “ZONE B”, this unit automatically enters the Virtual CINEMA DSP mode (see page 46).

Presence/Surround back channel priority

PRIORITY

The “PRIORITY” parameter is available only when you set “EXTRA SP ASSIGN” to “PRESENCE”.

Use this feature to prioritize either the presence or the surround back speakers when playing sources that contain surround back channel signals using the CINEMA DSP sound field programs.

Choices: PRNS, SUR. B

Select “PRNS” to use the presence speakers even when surround back channel signals are input. The signals for the surround back channels will be output from the surround speakers.

Select “SUR. B” to use the surround back speakers when surround back channel signals are detected in a CINEMA DSP program. The presence channel signals are output from the front speakers.

72 En

Page 76
Image 76
Yamaha RX-V861 72 En, Speaker settings, Extra speakers assignment Extra SP Assign, Front B speakers setting Front B