Advanced setup
See page 93 for the operation of the advanced setup.
■SCENE IR code setting SCENE IR
Use this feature to output the remote control signals at the REMOTE OUT jack automatically when this unit is in the SCENE mode.
Choices: ON, OFF
•Select “ON” when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component.
•Select “OFF” when the component connected to the REMOTE OUT jack is not the Yamaha component and does not have the capability of the SCENE control signals.
Note
If noises are output when you operate the SCENE function, set “SCENE IR” to “OFF”.
■Bi-amplifier setting BI-AMP
Use this feature to activate or deactivate the
Choices: ON, OFF
•Select “ON” if you want to activate the
•Select “OFF” if you want to deactivate the
Note
When
■Video parameter reset V.RESET
Use this feature to initialize the “VIDEO CONV.”, “HDMI
■Monitor check MON.CHK
Use this feature to activate or deactivate the monitor check function of this unit. When this parameter is set to “YES”, this unit receives the information of the available video signal resolutions from the video monitor connected via HDMI (see page 81).
Choices: YES, SKIP
■Tuner frequency step TU
(Asia and General models only)
Use this feature to set the tuner frequency step according to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
•Select “AM10/FM100” for North, Central and South America.
•Select “AM9/FM50” for all other areas.
