Sound field programs
This unit is equipped with a variety of precise digital decoders that allow you to enjoy
y
•The Yamaha HiFi DSP sound field programs recreate
•You can change sound field parameters. See page 61 for details.
Selecting sound field programs
Rotate the DPROGRAM selector (or set the operation mode selector to KAMP and then press one of the sound field selector buttons (P) repeatedly).
The name of the selected sound field program appears in the front panel display and in the OSD.
Notes
•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
Sound field program descriptions
y
•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 38).
•When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the DTS 96/24 decoder.
•Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.
•When the sampling frequency of the input sources are higher than 96 kHz, this unit does not apply any sound field programs.
Select a sound field program based on your listening preference, not merely on the name of the program, etc.
Remote control | Category of the | Name of the | Created sound | CINEMA DSP |
or | ||||
button | program | program | fields | HiFi DSP |
MOVIE
4
MOVIE
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special
DSP LEVEL | P.ROOM SIZE | S. ROOM SIZE | SB ROOM SIZE | |
P.INIT. DLY | S.INIT. DLY | SB INI. DLY | DIALG. LIFT | |
|
|
|
| |
|
| Program description | ||
Available sound field parameters (see page 63) |
Sound field indicators
Presence sound field
| Listening position |
Surround left | Surround right |
sound field | sound field |
Surround back sound field