Step 3: Turn on the power and press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to “6Ω MIN” before using this unit (see page 25). 4 ohm speakers can be also used as the front speakers (see page 94).
1Turn on the video monitor connected to this unit.
2Press BMASTER ON/OFF inward to the ON position on the front panel.
3Press FSCENE1 button.
“DVD Viewing” appears in the front panel display, and this unit automatically optimize own status for the DVD playback.
y
The indicator on the selected SCENE button lights up while this unit is in the SCENE mode.
Quick start guide
4Start playback of the desired DVD on your player.
y
If the connected DVD player is a Yamaha product and has capability of the SCENE control signals with the REMOTE OUT jack of this unit (see page 23), this unit can automatically activate the DVD player and start playback when you press the FSCENE1 button. Refer to the instruction manual of the DVD player for further information.
5Rotate 0VOLUME to adjust the volume.
Note
When you change the input source or sound field program, the SCENE mode is deactivated, and the indicator on the selected SCENE button turns off.
■Using the other SCENE buttons
In the following cases, try pressing the corresponding SCENE button to enjoy the playback of the desired sources.
Case A: “I want to listen to a music disc from the connected DVD player as the background music for this room...”
Press FSCENE2 (or
FSCENE2) to select “Disc Listening”.
Case B: “I want to watch a TV program...”
Press FSCENE3 (or
FSCENE3) to select “TV Viewing”.
Note
To use the “TV Viewing” template (Case B), you must connect a satellite receiver, a cable TV receiver or an HDTV decoder to this unit in advance. See page 20 for details.
INTRODUCTION
English
9 En
