Yamaha RX-V861 owner manual Selecting audio input jacks, 39 En

Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.

y

•We recommend that you set the audio input jack select to “AUTO” in most cases.

•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 83).

Press HAUDIO SELECT (or IAUDIO SEL)

repeatedly to select the desired audio input jack select setting.

Available input sources

Playback

Displaying the current status of this unit on a video monitor

You can display the operating information of this unit on a video monitor.

1Turn on the video monitor connected to this unit.

2Set the operation mode selector to KAMP and then press ODISPLAY on the remote

control.

The current status screen appears in the OSD.

STATUS

VCR DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD XM PHONO

Currently selected audio input jack select setting

AUTO	Automatically selects input signals in the
	following order: (1) HDMI (2) Digital
	signals (3) Analog signals.
HDMI	Selects only HDMI signals. When HDMI
	signals are not input, no sound is output.
COAX/OPT	Automatically selects input signals in the
	following order: (1) Digital signals input
	at the COAXIAL jack. (2) Digital signals
	input at the OPTICAL jack. When no
	signals are input, no sound is output.
ANALOG	Selects only analog signals. If no analog
	signals are input, no sound is output.

y

You can select the amount of time that the current status is displayed in the OSD by using the “OSD-AMP” parameter in “OPTION MENU” (see page 82).

Note

The OSD signal is not output at the VIDEO output jacks and will not be recorded.

OPERATION BASIC

Note

This feature is not available when no digital input jacks (OPTICAL, COAXIAL and HDMI) are assigned. In addition, HDMI is not available as an audio input jack select setting when the HDMI IN 1 and HDMI IN 2 jacks are not used. Use “I/O ASSIGNMENT” in “INPUT MENU” to reassign the respective input jack (see page 78).

English

39 En