Resetting the system
Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
•This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.
•The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press BMASTER ON/OFF on the front panel to release it outward to the OFF position.
1Press BMASTER ON/OFF on the front panel to release it outward to the OFF position to turn off this unit.
2Press and hold CTONE CONTROL and then press BMASTER ON/OFF inward to
the ON position to turn on this unit.
This unit turns on, and the advanced setup menu appears in the front panel display.
TONE CONTROL While holding down
MASTER
ON 
OFF 
3Rotate the DPROGRAM selector to select “PRESET”.
4Press CTONE CONTROL repeatedly to select “RESET”.
y
Select “CANCEL” to cancel the initialization procedure without making any changes.
5Press BMASTER ON/OFF to release it outward to the OFF position to confirm your selection and turn off this unit.
