For OPTICAL OUTPUT jack 1
OPTICAL OUT
Choices: (1) PHONO, CD,
INPUT MENU
OPTICAL OUT
.
Note
When you connect a component to both the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.
For OPTICAL INPUT jacks 2, 3 and 4
OPTICAL IN
Choices: (2) PHONO, CD,
DVR, VCR
(3)PHONO, CD,
DVR, VCR
(4)PHONO, CD,
DVR, VCR
INPUT MENU
OPTICAL IN
.
(3);;;;; DVD
( DVD )
(4);;;;;DTV/CBL (DTV/CBL )
For COAXIAL INPUT jacks 5 and 6
COAXIAL IN
Choices: (5) PHONO, CD,
(6)PHONO, CD,
INPUT MENU
COAXIAL IN
. (5);;;;; CD
( CD )
(6);;;;; DVD
( DVD )
(4);;;;;DTV/CBLTA
Customizing this unit (MANUAL SETUP)
For HDMI IN jacks 1 and 2 HDMI IN
Choices: [IN1] DVD, DTV/CBL,
INPUT MENU
HDMI IN
.[IN1];;; DVD
( DVD )
[IN2];;;DTV/CBL (DTV/CBL))
Note
You cannot select a specific item more than once for the same type of jack.
■Input rename B)INPUT RENAME
Use this feature to change the name of the input source that appears in the OSD and in the front panel display.
INPUT MENU
B)INPUT RENAME
DVD
[[]/[[]:Position [p]/[p]:Chara.
y
•This feature is useful when you change the input or output assignment for digital jacks and component video input jacks.
•You can only rename DOCK when iPod is stationed in the Yamaha Universal Dock connected to this unit.
1Press one of the input selector buttons (A) on the remote control to select the input source you want to change the name of.
2Press Dl / h to place the “_” (underscore) under the space or the character you want to edit.
3Press Dk / n to select the character you want to use and then press Dl / h to move
to the next space.
Notes
•You can use up to 8 characters for each input.
•Press Dnto change the character in the following order, or press Dkto go in the reverse order:
A to Z, 0 to 9, a to z, symbols (#, *,
OPERATION | ADVANCED |
|
|
4Repeat steps 1 through 3 to rename each input source.
5Press DENTER on the remote control to exit from “INPUT RENAME”.
English
