FM/AM tuning

4Press 5PRESET/TUNING/CH l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing.

Press 5hto select a higher preset station number.

Press 5lto select a lower preset station number.

Flashes

MEMORY

A1:FM

Preset station number

5Press 6MEMORY while the MEMORY indicator is flashing.

The station band and frequency appear in the front panel display with the preset station group and number you have selected. The MEMORY indicator disappears from the front panel display.

A1:FM

The displayed station has been stored as A1.

Notes

Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.

The reception mode (stereo or monaural) is stored along with the station frequency.

Selecting preset stations

You can tune into any desired station simply by selecting the preset station group and number under which it was stored.

y

When performing this operation with the remote control, set the operation mode selector to KSOURCE and then press TUNER to select “TUNER” as the input source.

1Press 4A/B/C/D/E (or press DA-E/CAT.l/ h) to select the desired preset station group (A to E).

The preset station group letter appears in the front panel display and changes each time you press the button.

2Press 5PRESET/TUNING/CH l/ hon the front panel (or DPRESET/CH k / n on the

remote control) to select the desired preset station number (1 to 8).

The preset station group and number appear in the front panel display along with the station band and frequency.

A1:FM

Exchanging preset stations

You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.

1Select preset station “E1” using 4A/B/C/D/E and 5PRESET/TUNING/CH l / h on the

front panel.

See “Selecting preset stations” on the left column.

2Press and hold 2EDIT for more than 3 seconds.

“E1” and the MEMORY indicator flash in the front panel display.

Flashes

MEMORY

E1:FM

Flashes

3Select preset station “A5” using 4A/B/C/D/E and 5PRESET/TUNING/CH l/ h.

“A5” and the MEMORY indicator flash in the front panel display.

See “Selecting preset stations” on the left column.

Flashes

MEMORY

A5:FM

Flashes

4Press 2EDIT again.

“EDIT E1–A5” appears in the front panel display and the assignments of the two preset stations are exchanged.

52 En

Page 56
Image 56
Yamaha RX-V861 owner manual Selecting preset stations, Exchanging preset stations, 52 En