Audio information

FORMAT

Signal format. When this unit cannot detect a

 

digital signal, it automatically switches to

 

analog input.

 

 

SAMPLING

The number of samples per second taken from

 

a continuous signal to make a discrete signal.

 

 

CHANNEL

The number of source channels in the input

 

signal (front/surround/LFE). For example, a

 

multi-channel soundtrack with 3 front

 

channels, 2 surround channels and LFE, is

 

displayed as “3/2/0.1”.

 

 

BITRATE

The number of bits passing a given point per

 

second.

 

 

FLAG

Flag data encoded in DTS, Dolby Digital, or

 

PCM signals that cue this unit to automatically

 

switch decoders.

 

 

Note

“–––” appears when this unit cannot display the corresponding information.

Video information

HDMI SIGNAL

Type of the source video signals and the

 

video signals output at the HDMI OUT

 

jack of this unit.

 

 

HDMI RES.

Resolution of the input signal (analog or

 

HDMI) and the output signal (HDMI).

 

When input video signals are composite

 

video or S-video signals, the input video

 

signals are indicated as “Composite” or

 

“S-Video”.

 

 

HDMI ERROR

Error message for HDMI sources or

 

connected HDMI devices. See page 102

 

for details.

 

 

Note

“–––” appears when this unit cannot display the corresponding information.

Using the sleep timer

Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (see page 24).

Note

Even if this unit is in the standby mode, this unit does not cut off the power to AC OUTLET(S) while charging connected iPod

(see page 24).

Playback

Set the operation mode selector to KAMP and then press MSLEEP repeatedly to set the

amount of time.

Each time you press MSLEEP, the front panel display changes as shown below.

SLEEP 120min

SLEEP 90min

SLEEP OFF SLEEP 30min

SLEEP 60min

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

Flashes

SLEEP

Lights up

SLEEP

Canceling the sleep timer

Press MSLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display.

Disappears

The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.

y

The sleep timer setting can also be canceled by pressing

GSTANDBY (or AMAIN ZONE ON/OFF) to set the main zone to the standby mode.

OPERATION

BASIC

 

 

English

41 En

Page 45
Image 45
Yamaha RX-V861 owner manual Using the sleep timer, 41 En, Audio information, Video information, Canceling the sleep timer