Troubleshooting (Continued)
The left and right sounds are unbalanced or reversed.
•Check that the speakers and components are connected correctly and securely.
•Adjust front balance parameter using SELECT and ADJ/VOL +/- buttons (see pages 18 and 39 - 40).
Severe hum or noise is heard.
•Check that the speakers and components are connected securely.
•Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light.
•Move your TV away from the audio components.
•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
•Clean the disc.
The surround effect is difficult to hear when you are playing a Dolby Digital sound track.
•Set the Dolby Surround to "OFF" in the SETUP menu.
•Check the speaker connections.
•Depending on the DVD disc, the output signal may at times be monaural or stereo even if the sound track is recorded in Dolby Digital format.
The sound comes from the center speaker only.
•Depending on the disc at times the sound may come from the center speaker only. This is normal.
No sound is heard from the center speaker.
•Make sure the Center is set to "ON" in SETUP menu (see page 33).
•The listening mode may be set to Dolby Pro Logic Phantom (see page 44).
•Adjust the center speaker volume (see pages 39 - 40).
No sound or only a very
•Make sure the Rear is set to "ON" in SETUP menu (see page 33).
•The listening mode may be set to
•Adjust the rear speaker volume (see pages 39 - 40).
Radio stations cannot be tuned in.
•Check that the antennas are connected correctly. Adjust the antennas and connect an external antenna if necessary.
•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.
•No stations have been preset.
•The tuner mode is not selected, select the Tuner mode.
The remote does not function.
•Remove any obstacles between the remote control and the system.
•Move the remote control closer to the system.
•Point the remote control at the remote sensor on the front panel.
•Replace all the batteries in the remote control with new ones if they are weak.
•Check that the batteries are loaded correctly.
The disc does not play.
•There is no disc inside. ("NO DISC" appears on the front panel display and the TV screen.) Insert a disc.
•Insert the disc correctly with the playback side facing down on the disc tray.
•Clean the disc (see page 10).
•The system cannot play
•Check the region code of the DVD disc (see page 9).
•Moisture has condensed inside the system.
Remove the disc and leave the system turned on for about an hour (see page 7).
The system starts playing the DVD automatically.
•The DVD features the auto playback function.
Playback stops automatically.
•Depending on the disc, the auto pause signal is recorded. While playing such a disc, the system stops playback at the signal.
Stopping playback, Search,
•Depending on the disc, some of the above operations may not be available.
Messages do not appear on the TV screen in the language you want.
•Select the language for OSD in SETUP menu (see page 31).
The disc must have the language you selected , If not, other language will be selected.
The language for the sound cannot be changed when you play a DVD.
•Multilingual sound is not recorded on the DVD.
•Changing the language for the sound is prohibited on the DVD.
The language for the subtitles cannot be changed when you play a DVD.
•Multilingual subtitles are not recorded on the DVD.
•Changing the language for the subtitles is prohibited on the DVD.
The subtitles cannot be turned off when you play a DVD.
•Depending on the DVD, you may not be able to turn the subtitles off.
The angles cannot be changed when you play a DVD.
•
•Change the angles when the angle mark appears on the TV screen (see pages 30 and 41).
•Changing the angles is prohibited on some DVDs.
The system does not operate properly.
•Static electricity, etc., may affect the system’ s operation. Disconnect the AC power cord once, then connect it again.
46
