Screen Saver Setting (SCR Saver)
Path: Main Page 
General Page 
SCR Saver
ON |
OFF |
Turns the screen saver option on or off.
If you turn the screen saver on, the screen saver image appears when you leave the system in pause or stop mode for more than 1 minute. The screen saver is useful to prevent your display from becoming damaged.
•ON: Turns the screen saver on.
•OFF: Turns the screen saver off.
Audio Mode Setting
Path: Main Page 
Speaker Setup Page 
Audio Mode
STEREO VSS PROLOGIC 5.1 CH LT / RT
SET AUDIO MODE
The Audio Output Mode setting adjusts itself automatically to match the type of audio on the disc you are playing.
•If you play a DVD movie disc which has either a Dolby Digital audio soundtrack, the "5.1" mode is selected automatically and sound is heard from all 5 satellites and the subwoofer. If you play a DVD which has a Dolby Surround / Pro Logic sound track the "Pro Logic" mode is selected automatically and sound is heard from all 5 satellites and the subwoofer.
Note:
If you are playing a DVD movie disc with Dolby Digital soundtrack and you do not hear sound from all 5 satellites remember to check the default settings in the menu of the disc you are playing. If the default setting of that specific disc is 'Stereo' you will not get any output from the center or rear satellite speakers. Refer back to page 22 for info on how to change the individual disc default settings.
•If you play a DVD with a stereo soundtrack, or an audio CD, the Pro Logic 'Stereo' mode is selected. Sound will only be heard from the left and right front speakers and the subwoofer. However you may then press the 'Listening' mode button on the remote control to select other Pro Logic modes and activate the center and/or rear satellite speakers. Refer to "Selecting Listening Modes" on page 44 for additional information.
•The VSS (Virtual Surround Sound) setting can provide a surround sound feeling from normal audio CD's or stereo broadcasts by causing a slight delay in the sound between the left front and right front speakers.
•The LT/RT Audio Out mode should only be used if you are feeding the audio signal from the left and right audio output jacks on the back panel of this unit to an external Dolby Pro Logic decoder. If you select the LT/RT Audio Out mode you may not have any output from the speakers connected to this system.
Note:
When the "5.1" mode is selected, there will be no audio output at left and right audio output jacks on the back panel of this unit.
32
