Video Output Setting
The initial Default Video Output Mode setting for this system is "CVBS" which is the correct setting when you are connecting this system to your TV using either the Video Out jack or the
If you do change the video output mode setting to either "RGB" or "YUV" you will not see any video output because this system does not have RGB or YUV output jacks. The RGB and YUV settings are only used on other variations of this system which have additional RGB and YUV video output jacks.
The 3 steps below indicate how to select a different video output setting. They are for information only. Your system has been preset to the CVBS setting and it must remain in the CVBS setting in order to view the picture on your TV.
1Press SETUP button to enter SETUP MENU. Use / to select GENERAL SETUP (see page 27), and then press ENTER button.
2Highlight VIDEO OUT using / , then press button to go
to the right option list. Select CVBS, RGB or YUV using / , then press ENTER to confirm your selection.
CVBS
RGB
YUV
3Press SETUP again to exit SETUP MENU.
Angle Mark Setting
Path: Main Page General Page Angle Mark
ON |
OFF |
Some DVD movies contain scenes which were filmed from multiple angles simultaneously. If the scene you are watching
was shot from multiple angles, the angle icon will appear on the screen. You may then press the angle button on the remote to select the alternate angles. The default Angle Mark setting is 'On'. If you change the setting to 'Off' the angle icon will not appear, even if the scene was shot from multiple angles.
•ON: appears on the TV screen.
•OFF: does not appear.
Angle mark is on | Angle mark is off |
Note:
•You can change the angles using the ANGLE button. For details, see page 41.
30