Emerson AV301 Presetting Radio Stations, Recalling Preset Stations, Changing Preset Stations

Presetting Radio Stations

You can preset up to 40 of your favorite AM and FM stations, in any combination, in the tuner memory for easy recall.

5 Press the MEMO button on the remote control again to enter the station into the memory. The Memory indicator and the preset station number disappear and the station is memorized.

TUNER

Number buttons

STATION+/-

TUNING+/-

			DVD	TUNER		AUX
	SUB	LANGUAGE			TITLE	RETURN
	TITLE
GO TO		ZOOM		MENU		ANGLE
						AUDIO
1		2		3
4		5		6		DISPLAY
7			8	9		N/P
>10		0		SLEEP		MUTE
						OPEN/
	SETUP					CLOSE

ENTER

	STOP						PLAY/PAUSE
					STEP
	STA -	STA +			ST/MO
					SLOW			ADJ/VOL
TUN		TUN+		MEMO
REPEAT			A-B	PROG.				SELECT
						TEST		LISTENING
					TONE

STANDBY

MEMORY

6To enter the next station in memory follow steps 2 and 3 to tune the desired station and press the MEMO button on the remote control. Then press either STA + or STA - button on the remote control to select another preset memory number, and press MEMO again to enter that station in the selected preset memory number.

Note:

1Press the STANDBY button on the remote control to turn the system On.

2Press either the TUNER button on the remote control, or the SOURCE button on the front panel, repeatedly to select the Tuner function and the desired radio band, AM or FM.

3Tune to the first station you wish to preset.

•Manual Tuning - repeatedly press the TUNING +/- buttons on the front panel or the remote control until the desired frequency appears on the display. (Note: You must use manual tuning if your are trying to tune to a weak station.)

•Automatic Tuning - press and hold the TUNING +/- button on the front panel or the remote control until the display begins to scan up or down. It will stop on the first strong station it finds. Repeat this process until it stops on your desired station.

4When the desired station appears on the display (Example: FM 103.5 MHz) press the MEMO button on the remote control. The Memory indicator and "P01" appear in the display indicating that you are ready to enter that station in preset memory #1.

You must press the MEMO button to memorize a station while the Memory indicator appears in the display (approximately 4 seconds), otherwise the station will not be memorized.

7Repeat step 6 until you have entered up to 40 stations in the tuner memory.

Recalling Preset Stations

1 Press STANDBY button on the remote control to turn the system 'ON' and, if necessary, press the TUNER button to select the Tuner function.

2 Press either the STA + or STA - button on the remote to select the desired preset memory number.

You may also use the number keys on the remote control to go directly to one of the preset memory stations. To select preset stations 1 through 9, press the number key. To select preset station numbers higher than 9 press the ">10" key one or more times followed by the appropriate number key, for example:

To Select Station Number	Press These Keys
10	>10 and 0
15	>10 and 5
21	>10 twice and then 1
34	>10 three times and then 4
40	>10 four times and then 0

Changing Preset Stations

To change any of the preset stations simply tune to the new station you wish to memorize and enter it in the preset memory number you wish to change. The new station will be memorized and the previous station will be erased.

19