6 How to scan to a computer

Scanning a document

There are several ways to scan documents.

You can use the (SCAN) key on the machine or the scanner drivers on your computer.

a To use the machine as a scanner, install a scanner driver. If the machine is on a Network, configure it with a TCP/IP address.

Install the scanner drivers on the Installation CD-ROM. (See the Quick Setup Guide and Scanning in the Software User's Guide.)

Configure the machine with a TCP/IP address if network scanning does not work. (See Configuring Network Scanning in the Software User's Guide.)

b Load your document. (See How to load documents on page 21.)

(DCP-7065DN) Use the ADF to scan multiple pages of documents. It feeds each sheet automatically.

Use the scanner glass to scan a page of a book or one sheet at a time.

c Do one of the following:

To scan using the (SCAN) key, go to Scanning using the scan key on page 26.

To scan using a scanner driver at your computer, go to Scanning using a scanner driver on page 27.

Scanning using the scan key

For more information, see Using the Scan key in the Software User's Guide.

a Press the (SCAN) key. b Press OK to choose Scan to PC.

c Choose the scan mode you want. Scan to:

File

E-mail

OCR 1

Image

1(Macintosh users)

This function is available after you download and install Presto! PageManager from http://nj.newsoft.com.tw/download/brother/ PM9SEInstaller_BR_multilang.dmg

d (For DCP-7065DN and HL-2280DW network users)

Choose the computer you want to send the data to.

e Press Start to begin scanning.

26