
Color Laser Printer
Quick Setup Guide
What is Included on the CD-ROM
You can Find a Variety of Information on the CD-ROM.
Read the “Safety Sheet” first to ensure that you use this printer safely.
Read this “Quick Setup Guide” before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows® 95 / 98 / Me, Windows NT® 4.0, Windows® 2000 / XP or Macintosh®).
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (Parallel, USB or Network). Most existing parallel cables support
If you are an Administrator, configure your network printer settings referring to the Network Quick Setup Guide (reverse side).
Printer | Carton Components | AC power cord Oil syringe Envelope adapter Toner cartridges |
| (Black, Yellow, Magenta | |
| Carton components may differ from one country to another. | and Cyan) |
Save all packing materials and the printer carton. They should be used when shipping the printer.
| Quick Setup Guide | Oil bottle | Fuser cleaner | OPC belt cartridge | Paper tray |
(including User’s | Windows® Driver Installation Guide |
|
|
|
|
Guide) | Macintosh® Driver Installation Guide |
|
|
|
|
LJ3765001 Printed in Japan
Windows®
Macintosh®
Install Software
Install the printer driver and utilities.
(Mac OS X is not supported by Install Software.)
Maintenance Tutorial
Instructional movie for printer maintenance.
Manual
View the User’s Guide and Network User’s Guide in PDF format. (Viewer included)
Color PDF Print Samples
View color samples of printouts from an
Learn More
Watch instructional movies to learn about our unique software features.
Brother Solutions Center
The Brother Solutions Center (http://solutions.brother.com) is your
Download the latest drivers and utilities for your printers, read the FAQs and troubleshooting tips, or learn about special print solutions.
Setting Up the Printer
Step 1 Install the Oil Bottle and the Fuser Cleaner
Protective Parts | Fuser Cleaner Lock Lever | Fusing Unit Pressure |
|
Top Cover | Oil Bottle Lock Lever | Release Lever | Oil Bottle |
|
|
| |
|
|
| Fusing Unit |
1 Remove the protective parts. | 2 Release the oil bottle lock levers and | 3 Move the fusing unit pressure release | 4 Install the oil bottle in the fusing unit with the | 5 Lock both oil bottle lock levers. |
Open the top cover. | the fuser cleaner lock levers. | levers to the SET position. | label side facing you. |
|
Fuser Cleaner
6 Insert the fuser cleaner into the fusing | 7 Lock both fuser cleaner lock levers. |
unit with the roller side facing you. |
|
Step 2 Install the OPC Belt Cartridge | any length of time. |
| Note: Please be careful not to touch the green surface of the OPC belt or expose it to light for |
Step 3 Install the Toner CartridgesColor Labels
Front
Cover
1 Open the front cover.
Belt Cartridge
Lock Levers
2 Release both belt cartridge lock levers by pulling them up.
Belt Tension Release Pin | Protective Sheet |
OPC Belt Cartridge | Printer Guides |
3 Remove the orange belt tension release | 4 Insert the OPC belt cartridge |
pins from both sides of the OPC Belt | into the printer guides with |
cartridge. | the flat side facing you. |
Remove the protective sheet. |
|
5 Lock the belt cartridge lock levers.
Close the top cover.
Toner Cartridge ‘REMOVE’ Tape
Protective
Cover
1 Rock the toner cartridge | 2 Pull off the tape labeled | 3 Install the toner cartridge by sliding it into | 4 Repeat Steps 1 through 3 for |
3 to 4 times. | ‘REMOVE,’ and then remove | the correct guide. Match the cartridge color | the remaining toner cartridges. |
| the orange protective cover. | label to the corresponding label on the | Close the front cover. |
|
| printer. |
|
Step 4 Load Paper in the Paper Tray
Paper Tray
Cover
Paper Tray |
|
|
1 Remove the paper tray cover. | 2 Adjust the paper guides to fit the size of paper | 3 Fit the paper tray cover. |
| you want to load. | Insert the paper tray into the |
| Load paper in the paper tray. | printer. |
Step 5 Print a Test Page | Note: When you want to change the language of the control panel message, refer to “Setting Your Language on the Control Panel” on the reverse side. | |
| ||
|
| Control Panel |
| K C M Y | K C M Y |
| NETWORK READY | NETWORK READY |
|
1 Make sure the printer power button is off. | 2 Connect the AC power cord to the | 3 Turn on the power | 4 After the printer has warmed up, the | 5 Press the Go button. The printer will print a test page. |
Do NOT connect the interface cable. | printer, and then plug it into the AC | button. | READY message will appear. | Check that the test page is printed correctly. |
| outlet. |
|
|
|
Continue to the Windows® Driver Installation Guide or Macintosh® Driver Installation Guide.