Network Scanning

Configuring network scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the Model drop-down list in the main screen of ControlCenter2. If you have already installed the MFL-Pro Suite software following the network installation steps in the Quick Setup Guide then this selection should already be made.

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel. uuNetwork User’s Guide: Control Panel Setup

a From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click Device Selector.

The Device Selector window appears. This window can also be opened from ControlCenter2. For more information, see Using ControlCenter2 uu page 164.

b Specify your machine by IP address or mDNS service name. To change the IP address, enter the new IP address.

You can also choose a machine from the list of the machines available. Click Browse to show the list.

c Click OK.

13

205