Brother Scan, Note, Note, Note, Start, Start, PreScan, PreScan, Contrast, Scan Type, Auto Crop, Resolution, Brightness, Document Size

Scanning

Pre-Scanning to crop a portion you want to scan

You can preview your image and crop unwanted portions before scanning by using the PreScan button. When you are satisfied with the preview, click Start on the Scanner Setup dialog box to scan the image.

a Follow the steps from a to g of Scanning a document into the computer uu page 39.

2

b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and Document Size as needed.

Note

Pre-Scanning is not available when choosing Auto Crop.

c Click PreScan.

The whole image is scanned into the computer and appears in the scanning area of the Scanner Setup dialog box.

d Press and hold down the left mouse button and drag it over the portion you want to scan.

1

1 Scanning area

Note
You can enlarge the image using the	icon, and then use the	icon to restore the image to its
original size.

e Load your document again.

Note

Skip this step if you loaded the document on the scanner glass in step a.

f Click Start.

This time only the chosen area of the document appears in the PaperPort™12SE window (or your application window).

g In the PaperPort™12SE window, use the options available to refine the image.

41