Troubleshooting and Routine Maintenance
135
B
gPush the paper tray firmly back into the
machine.
Note
Make sure you pull out the paper support
until it clicks.
Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
aPress Menu.
bPress a or b to choose
Initial Setup.
Press OK.
cPress a or b to choose Dial Tone.
dPress d or c to choose Detection or
No Detection.
Press OK.
ePress Stop/Exit.
Telephone line interference B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting, which reduces the
modem speed to minimise errors.
aPress Menu.
bPress a or b to choose Fax.
Press OK.
cPress a or b to choose
Miscellaneous.
Press OK.
dPress a or b to choose
Compatibility.
ePress d or c to choose Normal (or
Basic).
Basic cuts the modem speed to
9600 bps. Unless interference is a
recurring problem on your telephone
line, you may prefer to use it only
when needed.
Normal sets the modem speed at
14400 bps. (factory setting)
Press OK.
fPress Stop/Exit.
Note
When you change the compatibility to
Basic, the ECM feature is only available
for colour fax sending.