Brother MFC-680CN Copy setting s

Making copies
81
13
Copy settings 13
You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode
Timer on page 22.)
If you have finished choosing settings, press
Mono Start or Colour Start.
If you want to choose more settings, press a
or b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 85.)
Changing copy speed and
quality 13
You can choose from a range of quality. The
factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
dPress a or b to choose Quality.
ePress d or c to choose Fast, Normal or
Best.
Press OK.
fIf you do not want to change additional
settings, press Mono Start or
Colour Start.
Enlarging or reducing the
image copied 13
You can choose an enlargement or reduction
ratio.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
d Press a or b to choose Enlarge/Reduce .