Chapter 3
24
Volume Settings 3
Ring Volume 3
You can choose a range of ring volume
levels, from High to Off.
While in Fax mode , press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.You can also change the volume
through the menu, by following the
instructions below:
Setting the Ring Volume from the
menu 3
aPress Menu.
bPress a or b to choose
General Setup.
Press OK.
cPress a or b to choose Volume.
Press OK.
dPress a or b to choose Ring.
ePress d or c to choose Low, Med, High
or Off.
Press OK.
fPress Stop/Exit.
Beeper Volume 3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
aPress Menu.
bPress a or b to choose
General Setup.
Press OK.
cPress a or b to choose Volume.
Press OK.
dPress a or b to choose Beeper.
ePress d or c to choose Low, Med, High
or Off.
Press OK.
fPress Stop/Exit.
Speaker Volume 3
You can choose a range of speaker volume
levels, from High to Off.
aPress Menu.
bPress a or b to choose
General Setup.
Press OK.
cPress a or b to choose Volume.
Press OK.
dPress a or b to choose Speaker.
ePress d or c to choose Low, Med, High
or Off.
Press OK.
fPress Stop/Exit.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing d or c.
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won’t hear callers
leaving messages. The volume for other
operations can still be controlled using
d or c.