Brother MFC-680CN Advanced fax operations (Mon och rom e onl y)

65
10
10
You can only use one advanced fax
operation at a time:
Fax Forwarding
Fax Storage
Fax Preview
PC Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the advanced fax
operations, a question will appear on the
LCD. (See Changing Advanced Fax
Operations on page 70.)
Fax Forwarding 10
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
aPress Menu.
bPress a or b to choose Fax.
Press OK.
cPress a or b to choose
Advanced Fax Operation.
Press OK.
dPress a or b to choose
Forward/Store.
Press OK.
ePress a or b to choose Fax Forward.
Press OK.
fEnter the forwarding number (up to 20
digits).
Press OK.
gPress a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• The machine can store faxes
approximately 24 hours if there is a power
failure.
• When Fax Forwarding is turned on your
machine will only receive monochrome
faxes into memory. Colour faxes will not
be received, unless the sending machine
converts them to monochrome before
sending.
hPress Stop/Exit.
Advanced fax operations
(Monochrome only) 10