Configuration methods

Configuring your network using Wi-Fi Direct

(For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and MFC-9340CDW)

The Wi-Fi Direct network settings are configured from the control panel of the machine.

One push configuration using Wi-Fi Direct

2

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these instructions.

a Press .

b Press Wi-Fi Direct.

c Swipe up or down, or press a or b to display Push Button. Press Push Button.

d When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

e Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed.

Press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press .

f Do one of the following:

When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine directly.

When your Brother machine is not the G/O (Group Owner), it will display available device names with which to configure a Wi-Fi Direct network. Choose the mobile device you want to connect to and press OK. You can re-search for available devices by pressing Rescan.

g If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.

11