Configuration methods

Configuring your network using Wi-Fi Direct

(For HL-3140CW, HL-3150CDW and HL-3170CDW)

The Wi-Fi Direct network settings are configured from the control panel of the machine.

One push configuration using Wi-Fi Direct

2

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these instructions.

a

b

c

d

Press a or b to choose Network.

Press OK.

Press a or b to choose Wi-Fi Direct.

Press OK.

Press a or b to choose Push Button.

Press OK.

When Wi-Fi Direct On? is displayed, press a to accept. To cancel, press b.

e Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device and press OK. is displayed.

Press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press Back.

f Do one of the following:

When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine directly.

When your Brother machine is not the G/O (Group Owner), it will display available device names with which to configure a Wi-Fi Direct network. Press a or b to choose the mobile device you want to connect to and press OK. You can re-search for available devices by pressing a or b to display Rescan and press OK.

g If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device, you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection failed, see Troubleshooting on page 16.

6