Configuration methods

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), you can configure a Wi-Fi Direct network by following these instructions.

a Press .

2

b Press Wi-Fi Direct.

c Swipe up or down, or press a or b to display Group Owner. Press Group Owner and then press On.

d Swipe up or down, or press a or b to display PIN Code. Press PIN Code.

e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

f When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press .

g The machine will wait for a connection request from your mobile device. When PIN Code appears, input the PIN displayed on your mobile device to the machine.

Press OK.

h If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.

14