Configuration methods

Manual configuration for a Wi-Fi Direct network

If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.

a Press .

2

b Press Wi-Fi Direct.

c Swipe up or down, or press a or b to display Manual. Press Manual.

d When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

e The machine will show the SSID name and Password for two minutes. Go to the wireless network settings page of your mobile device and input the SSID name and password.

f If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.

15