Configuration methods

One push configuration using WPS (Wi-Fi Protected Setup)

If your mobile device supports WPS (PBC; Push Button Configuration), you can configure a Wi-Fi Direct network by following these instructions.

a Press .

2

b Press Wi-Fi Direct.

c Swipe up or down, or press a or b to display Group Owner. Press Group Owner and then press On.

d Swipe up or down, or press a or b to display Push Button. Press Push Button.

e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off.

f When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate your mobile device's WPS one push configuration method (see your mobile device's user's guide for instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press .

g If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 16.

12