Configuring your machine for a wireless network (For MFC-9325CW)

Confirm your wireless network setup method

There are four methods to configure your wireless network machine. Use the Brother installer application (recommended), WPS/AOSS from the control panel menu, the machine’s control panel or the PIN Method of Wi-Fi Protected Setup.

Configuration using the Brother installer application on the CD-ROM to

3

configure your wireless network machine (Recommended)

 

You can use the Brother installer application on the CD-ROM we have provided with the printer. You will be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You must know your wireless network settings before you proceed with this installation. (See Using the Brother installer application on the CD-ROM to configure your machine for a wireless network on page 31.)

Configuration temporarily using a USB cable

You can temporarily use a USB cable to configure your Brother machine for your wireless network.

USB method

You can remotely configure the machine from a computer that is also on the network using a USB cable

(A) 1.

1You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.

28