Network printing from Windows®: basic TCP/IP
Configuring the standard TCP/IP port
Printer driver not yet installed
a Put the supplied
b The
d Click Next in response to the Welcome message. Follow the
f Choose Brother
Note
Contact your administrator if you are not sure about the location and name of the printer on the network. 8
h Continue through the wizard clicking Finish when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps: a (Windows Vista®)
Click the | button, Control Panel, Hardware and Sound, and then Printers. |
(Windows® 7) | |
Click the | button, Devices and Printers. |
(Windows Server® 2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
(Windows® XP and Windows Server® 2003)
Click the Start button and choose Printers and Faxes.
b c
d Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New Port... button.
e f g
The Standard TCP/IP Port Wizard will start.
Enter the IP address of your network printer. Click Next.
Click Finish.
80