Configuring your machine for a wireless network (For
Windows Vista® and Windows® 7
If you are using your Windows Vista® or Windows® 7 computer as a Registrar, follow these steps:
Note
To use a Windows Vista® or Windows® 7 computer as a Registrar, you need to register it to your network
in advance. See the instruction manual that came with your access point/router.
1 (Windows Vista®)
Click | , Network, and then Add a wireless device. |
(Windows® 7)
Click , Control Panel, Network and Internet, and then
Add a wireless device to the network.
3
2Choose your machine and click Next.
3Input the PIN which the LCD shows in d on page 38 and then click Next.
4Choose your network that you want to connect to, and then click Next.
5Click Close.
f If the LCD shows Connected, the machine has successfully connected to your access point/router. You can now use your machine in a wireless network.
If the LCD shows Connection Fail, the machine has not successfully connected to your access point/router. Try starting from c again. If the same message is indicated again, reset the machine back to the default factory settings and try again. (For resetting, see Restoring the network settings to factory default on page 71.)
If the LCD shows No Access Point, the machine has not detected your access point/router on your network with the
Or an incorrect PIN has typed into the WPS
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please
39